Weidmuller IE-CS-2TX-1RS232/485 User Manual page 69

IE-CS(T)-2TX-xRS232/485
1. Select the IE-CS(T)-2TX-xRS232/485 with "Lock" status, click the right mouse button, and then select
Unlock.
2. After inputting the correct password, the Administrator will display an "Unlock ok" message.
3. The "Lock" status will change to "Unlock," and the Administrator utility will keep this
IE-CS(T)-2TX-xRS232/485 in the Unlock status throughout this Administrator session.
The meanings of the six "Status" states are given below (note that the term Fixed is borrowed from the
standard fixed IP address networking terminology):
Lock
The IE-CS(T)-2TX-xRS232/485 is password protected, "Broadcast Search" was used to locate it, and the
password has not yet been entered from within the current Administrator session.
Unlock
The IE-CS(T)-2TX-xRS232/485 is password protected, "Broadcast Search" was used to locate it, and the
password has been entered from within the current Administrator session. Henceforth during this
Administrator session, activating various utilities for this IE-CS(T)-2TX-xRS232/485 will not require
re-entering the server password.
Blank
The IE-CS(T)-2TX-xRS232/485 is not password protected, and "Broadcast Search" was used to locate it.
Fixed
The IE-CS(T)-2TX-xRS232/485 is not password protected, and "Search by IP address" was used to locate it.
6-6
IP Serial LIB