Table of Contents
Advertisement
IE-CS(T)-2TX-xRS232/485
To modify the serial settings for a specific port, click Port X (X=1 or 2) under Serial Settings.
Port alias
Setting
1 to 15 characters
(E.g., PLC-No.1)
"Port alias" is included to allow easy identification of the serial devices that are connected to the
IE-CS(T)-2TX-xRS232/485's serial ports.
Serial Parameters
ATTENTION
Check the serial communication parameters in your Serial Device's user's manual. You should set up the
IE-CS(T)-2TX-xRS232/485's serial parameters with the same communication parameters being used by your
serial devices.
Baudrate
Setting
50 bps to 921.6 Kbps
Data bits
Setting
5, 6, 7, 8
When a user sets the Data bits to 5 bits, the Stop bits setting will automatically change to 1.5 bits.
Stop bits
Setting
1, 1.5, 2
Stop bits will be set to 1.5 when the Data bits is set to 5 bits.
Parity
Setting
None, Even, Odd,
Space, Mark
Factory Default
None
Factory Default
115.2 Kbps
Factory Default
8
Factory Default
1
Factory Default
None
5-10
Web Console Configuration
Necessity
Optional
Necessity
Required
Necessity
Required
Necessity
Required
Necessity
Required
Advertisement
Table of Contents
