Network Settings - Weidmuller IE-CS-2TX-1RS232/485 User Manual

IE-CS(T)-2TX-xRS232/485
Server name
Setting
1 to 39 characters
Web/Telnet Console
The Disable option for "Web console" and "Telnet console" is included for security reasons. In some cases, you
may want to disable one or both of these console utilities as an extra precaution to prevent unauthorized users
from accessing your IE-CS(T)-2TX-xRS232/485. The factory default for both "Web console" and "Telnet console
is Enable.
Web console
Setting
Enable or Disable
Telnet console
Setting
Enable or Disable
ATTENTION
If you disable both the "Web console" and "Telnet console," you can still use the SE-Converter Administrator
to configure the IE-CS(T)-2TX-xRS232/485 either locally or remotely over the network. Refer to Chapter 6
for more details.
Reset button protect
Setting
No or Yes
NOTE: Select Yes to allow limited use of the Reset Button, this means that the "Reset to default"
button only works within a 60 seconds time frame. I.e., within 60 seconds after booting up, after
which the "Reset to default" button will be automatically disabled and will no longer work.

Network Settings

You must assign a valid IP address to the IE-CS(T)-2TX-xRS232/485 before the device can start operating
within your network. Your network system administrator should provide you with an IP address and related
settings for your network. The IP address must be unique within the network (otherwise the
Factory Default
NP[model name]_[Serial No.]
Factory Default
Enable
Factory Default
Enable
Factory Default
None
5-6
Web Console Configuration
Necessity
Optional
Necessity
Required
Necessity
Required
Necessity
Optional