Unlock Password Protection - Weidmuller IE-CS-2TX-1RS232/485 User Manual

IE-CS(T)-2TX-xRS232/485
2. The Broadcast Search window will open and display the Model, IP Address, MAC Address, and Progress of
the search for that particular device.
3. When the search is complete, the Broadcast Search window will close, and the IE-CS(T)-2TX-xRS232/485s
that were located will be displayed in the right pane of the Administrator window. If you found more than
one IE-CS(T)-2TX-xRS232/485 connected to this network, refer to the MAC address sticker on your
IE-CS(T)-2TX-xRS232/485 (s) to determine which IE-CS(T)-2TX-xRS232/485 (s) are the ones you wish to
configure. To configure an IE-CS(T)-2TX-xRS232/485, place the cursor over the row displaying that
IE-CS(T)-2TX-xRS232/485's information, and then double click the left mouse button.
ATTENTION
Before modifying the IE-CS(T)-2TX-xRS232/485's configuration, use Broadcast Search to locate all
IE-CS(T)-2TX-xRS232/485s connected to the LAN, or use Specify by IP Address to locate a particular
IE-CS(T)-2TX-xRS232/485.

Unlock Password Protection

If the IE-CS(T)-2TX-xRS232/485 is password protected (indicated by "Lock" for Status), you will receive the
following error, and you will not be able to use the right click method to open the configuration page.
In this case, proceed as follows to "Unlock" the IE-CS(T)-2TX-xRS232/485.
6-5
IP Serial LIB