Upgrading The Firmware - Weidmuller IE-CS-2TX-1RS232/485 User Manual

IE-CS(T)-2TX-xRS232/485
ATTENTION
You can simultaneously modify the configurations of multiple IE-CS(T)-2TX-xRS232/485 that are of the same
model. To select multiple IE-CS(T)-2TX-xRS232/485s, hold down the Ctrl key when selecting additional
IE-CS(T)-2TX-xRS232/485s, or hold down the Shift key to select a group of IE-CS(T)-2TX-xRS232/485s.

Upgrading the Firmware

Follow these steps to upgrade the firmware of an IE-CS(T)-2TX-xRS232/485.
1. To start S/E-Converter Administrator,click Start  Programs -> Weidmüller SE-Converter
Administration  S/E-Converter Administrator.
2. Unlock the IE-CS(T)-2TX-xRS232/485 you wish to configure if it is password protected. Right click a specific
IE-CS(T)-2TX-xRS232/485 and select the Upgrade Firmware function to start upgrading the firmware.
3. Select the correct ROM file to download.
4. Wait while the Upgrade Firmware action is processed.
ATTENTION
You can simultaneously upgrade the firmware of multiple IE-CS(T)-2TX-xRS232/485s that are of the same
model. To select multiple IE-CS(T)-2TX-xRS232/485s, hold down the Ctrl key when selecting an additional
IE-CS(T)-2TX-xRS232/485, or hold down the Shift key to select a block of IE-CS(T)-2TX-xRS232/485s.
6-8
IP Serial LIB