Table of Contents
Advertisement
Model W1829 (Mfd. Since 2/20)
General
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine immediately
if you ever observe any of the items below, and fix the
problem before continuing operations:
•
Loose mounting bolts.
•
Damaged blades.
•
Worn or damaged wires.
•
Dust bag full.
•
Any other unsafe condition.
Monthly.Check
•
V-belt tension, damage, or wear.
•
Clean/vacuum dust buildup from underneath body
and off of motor.
Cleaning.&.Protecting
Cleaning the Model W1829 is relatively easy. Vacuum excess
wood chips and sawdust, and wipe off the remaining dust
with a dry cloth. If any resin has built up, use a resin
dissolving cleaner to remove it.
Protect the unpainted
cast iron table
after every use—this ensures moisture from wood dust does
not remain on bare metal surfaces. Keep your
free with regular applications of quality lubricants.
Lubrication
Since all bearings are sealed and permanently lubricated,
simply leave them alone until they need to be replaced.
Do not lubricate them.
MAINTENANCE
by wiping it clean
table
rust-
-29-
MAKE. SURE. that. your. machine. is.
unplugged. during. all. maintenance.
procedures!. If. this. warning. is. ignored,.
serious.personal.injury.may.occur.
Advertisement
Table of Contents
