Power Connection - Woodstock SHOP FOX W1829 Owner's Manual

Model W1829 (Mfd. Since 2/20)
Power.Connection
After you have completed all previous setup instructions
and circuit requirements, the machine is ready to be
connected to the power supply.
To avoid unexpected startups or property damage, use
the following steps whenever connecting or disconnecting
the machine.
Connecting Power
1. Turn the machine power switch OFF.
2. Insert the power cord plug into a matching power
supply receptacle, as shown in Figure 18. The
machine is now connected to the power source.
Disconnecting Power
1. Turn the machine power switch OFF.
2. Grasp the molded plug and pull it completely out of
the power supply receptacle, as shown in Figure 19.
DO NOT pull by the cord as this may damage the
wires inside.
Figure 18. Connecting power
Figure 19. Disconnecting power.
-19-