Woodstock SHOP FOX W1829 Owner's Manual page 19

Model W1829 (Mfd. Since 2/20)
5. Slide the fence bracket assembly over and onto the
dovetail of the support and locking plate, as shown
in Figure 13.
6. Install the fence tilting handle by screwing the
handle shaft into the bracket assembly, as shown in
Figure 14.
7. Slide the fence forward until it contacts the
cutterhead guard and the cutterhead guard
completely covers the cutterhead, as shown in
Figure 15.
Fence
Bracket
Assembly
Figure 13. Sliding the fence bracket onto
the fence support dovetails.
Bracket
Assembly
Figure 14. Fence tilting handle installed.
Fence
Figure 15. Fence positioned over the
-17-
Fence Support
Dovetail
Outward
Stops
Fence Tilting
Handle Shaft
Jointer Tables
Cutterhead
Guard
jointer tables.