Cd Sound (Standard) Test - Toshiba PORTEGE M300 Maintenance Manual

3 Tests and Diagnostics

3.31.3 CD Sound (Standard) test

To execute the CD Sound (Standard) test, press 3 and Enter. Insert the test media (TOSHIBA
TEST CD-ROM or ABEX TEST CD-ROM) or music CD on the market (if the test media can not
be prepared). Following menu appears in the display.
For details on use of test media, refer to (1) Test media (Toshiba-made test media).
For details on use of audio CD on the market, refer to (2) Audio CD.
(1) Test media (Toshiba-made test media)
CD/DVD TEST
SUB-TEST : XX
PASS COUNT : XXXXX
WRITE DATA : XX
ADDRESS : XXXXXX
01 – Japanese Narration
02 – English Narration
03 – Test Tone A (100Hz – 20Hz)
04 - Test Tone B (400Hz – 3KHz L-R)
Subtest01 Japanese Narration
Selected this subtest, narration in Japanese starts and following message appears in
the display.
Play start CD sound !
Press any key <Play stop>.
PORTEGE M300 Maintenance Manual (960-504)
IN PROGRESS XXXXXXXX
ERROR COUNT: XXXXX
READ DATA
STATUS
Drive # = 0, ATAPI status =00
[[Block address = XXXXXXXX]]
[[Block length
Final : Block address = XXXXXXXXX
3.31 Sound Test program
xxxxxxx DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break] ; test end
[Ctrl]+[C]
: XX
: XXX
Command = XX
= XXXXXXXX]]
; key stop
3-91