Table of Contents
Advertisement
Useful information
Warranty
The warranty terms can be called up from www.blaupunkt.com.
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Service
If you ever need to use a repair service you will find information
about service partners in your country under
www.blaupunkt.com.
Technical data
Voltage supply
Operating voltage:
10.5 – 14.4 V
Current consumption
In operation:
<10A
10 sec. after swithch-ofF: < 3.5mA
Amplifier
Output power:
4 x 24 watts sine at
14.4 V at 4 ohms.
4x50 watts max.p
Tuner
Wavebands in Europe/Asia/Thailand:
FM:
87.5 – 108 MHz
AM (MW):
531 – 1,602 kHz
Wavebands in the US:
FM:
87.7 – 107.9 MHz
AM (MW):
530 – 1,710 kHz
Wavebands in South America:
FM:
87.5 – 107.9 MHz
AM (MW):
530 – 1,710 kHz
FM frequency response: 30 – 15,000 Hz
30
AUTORADIO
Factory settings | Useful information | Technical data | installation
4 channels:
4 V
Input sensitivity
MIC :
300 mV / 10 kΩ
Dimensions and weight
W x H x D:
178 x 50 x 110 mm
Weight:
approx. 0.85 kg
EN Installation instructions
Safety instructions
When carrying out installation work and making connections please
Bedienungsanleitung
observe the following
Disconnect the negative terminal of the battery! When doing so,
Operating instructions
please observe the vehicle manufacturer's safety instructions.
Make sure you do not damage vehicle components when drilling any
holes.
Mode d' emploi
The cross sections of the positive and negative cables must not be less
than 1.5 mm².
Istruzionl of uso
Do not connect the vehicle's plug connectors to the radio!
You can obtain the adapter cable required for your vehicle type
from any BLAUPUNKT dealer.
Gebruiksaanwijizing
Depending on the model, your vehicle may differ from the descrip-
tion provided here. We accept no responsibility for any damages due
Bruksanvisining
to incorrect installation or connection or for any consequential
damages.
If the information provided here is not suitable for your specific insta-
llation requirements, please contact your Blaupunkt dealer, your vehicle
manufacturer or our telephone hotline.
When instaaling an amplifier, you must first connect the device earth
connections before connecting the plugs for the line-out jacks.
Earth connection of external devices may not be connected to earth
of car sound system (housing).
30
61
Hide quick links:
Advertisement
Table of Contents
