Preface - Siemens SIMATIC ET 200SP System Manual

Preface

Preface
Purpose of the documentation
This documentation provides important information on configuring, installing, wiring and
commissioning the ET 200SP distributed I/O system.
Basic knowledge required
A basic knowledge of automation technology is required to understand the documentation.
Validity of the documentation
This documentation applies to the distributed I/O system, ET 200SP.
Definition
In this document, " motor starter" always refers to all variants of the ET 200SP motor
starters.
Conventions
Please pay particular attention to notes highlighted as follows:
Note
Notes contain important information on the product, handling the product or on part of the
documentation to which you should pay particular attention.
Standards
You can find a dated reference to the respective standards or the EC Declaration of
Conformity on the Internet (https://support.industry.siemens.com)
Distributed I/O system
System Manual, 09/2019, A5E03576849-AJ
3