Technical Specifications; Standards, Approvals And Safety Notes - Siemens SIMATIC ET 200SP System Manual

Technical specifications

Introduction
This chapter lists the technical specifications of the system:
● The standards and test values that the ET 200SP distributed I/O system complies with
and fulfills.
● The test criteria according to which the ET 200SP distributed I/O system was tested.
Technical specifications for the modules
The technical specifications of the individual modules can be found in the manuals of the
modules themselves. In the event of deviations between the statements in this document
and the manuals, the statements in the manuals take priority.
14.1

Standards, approvals and safety notes

Currently valid markings and approvals
Note
Information on the components of the ET 200SP
The currently valid markings and approvals are printed on the components of the ET 200SP
distributed I/O system.
267
14
Distributed I/O system
System Manual, 09/2019, A5E03576849-AJ