Commissioning
11.2 Commissioning the ET 200SP for PROFINET IO
11.2.3
ET 200SP as an IO device
Configuration example
To use the ET 200SP distributed I/O system as an IO device, you need the IM 155-6 PNxx
interface module.
Figure 11-3
Commissioning procedure
For commissioning of the ET 200SP distributed I/O system as an IO device on the
PROFINET IO, we recommend the following procedure:
Table 11- 3
Step
1
2
4
5
6
7
8
198
ET 200SP as an IO device
Procedure for commissioning the ET 200SP as an IO device for PROFINET IO
Procedure
Installing ET 200SP
Connecting ET 200SP
Supply voltages
•
PROFINET IO
•
Sensors and actuators
•
Configuring IO controller
Checking the protective
measures
Switching on supply voltages
for the IO controller
Switching on supply voltages
for IO devices
Downloading the configura-
tion to the IO controller
See ...
Section Installation (Page 63)
Section Wiring (Page 86)
Documentation of the IO controller
-
Documentation of the IO controller
Interface module
(http://support.automation.siemens.com/WW/view/en/5
5683316/133300) Manual
STEP 7 online help
System Manual, 09/2019, A5E03576849-AJ
Distributed I/O system