Calibration; Figure 2-18. Active Alerts Cleared; Figure 2-19. Utilities>Alerts Log Of Active And Past Alerts And Events - Teledyne N500 User Manual

When all Alerts are cleared, the Alerts menu tab no longer shows the caution symbol, and
a green LED replaces the caution symbol in the bottom right corner of the interface
(Figure 2-18). However, Alerts can reappear if the conditions causing them are not
resolved. For troubleshooting guidance, refer to Section 0.

Figure 2-18. Active Alerts Cleared

Alerts and Events remain recorded in the Utilities>Alerts Log (Figure 2-19).
Figure 2-19. Utilities>Alerts Log of Active and Past Alerts and Events

CALIBRATION

The Calibration menu is used for zero/span/multipoint calibrations and for external
calibration with valve options installed. Calibration procedures are presented in Section 4.
36 Teledyne API N500 CAPS NO Analyzer with NumaView™ Software
089770000 Rev 05
X