Valor 1435 Installation Manual

INSTALLATION MANUAL
1435 Three-Sided Trim Kit
Use with Valor heater models 1400 ONLY
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
The 1435 trim is intended to be used on Valor heaters
models 1400. Mounting of the 1435 does not aff ect
clearances or other specifi cations listed in the heater
installation manuals—see installation manual supplied
with the heater for more information.
46-1/4" [1175 mm]
4005086-03
© Copyright Miles Industries Ltd., 2019
H6 Series
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
I N ST A LL E R
L e a v e t h i s m a n u a l
w i t h t h e a p p l i a n c e .
C O N S U M E R
Retain this manual
for future reference.
Note: Mounting of this trim allows for non-combustible
material up to 3/4" (19 mm) thick installed over top of
the required 1/2" (13 mm) cement board. For thicker
fi nishes, refer to appliance manual.
1400 engine
Linerbox
bracket
LH door
Barrier screen
Overview
RH door
Removable panel
Trim assembly