Installation Procedure; Mounting The Mw 800 - Motorola MW 800 Series Vehicle Installation Manual

12 MW 800 Vehicle Installation Guide

Installation Procedure

Mounting the MW 800

Perform the following steps to install the MW 800:
Step 1. Determine the proper mounting location.
Step 2. Remove the hardware bag from the shipping container.
Step 3. Ensure that the pedestal is securely bolted together.
Step 4. The mount assembly can be mounted directly on the vehicle transmission hump
secured rigidly to the vehicle transmission hump. (Commercial hump plates are
available, such as the SDI 7200 system or equivalent).
Figure 6
Mount Assembly General View (CPU Box Mount at rear)
Figure 8
MW 800 on Mount Assembly (CPU Box at rear)
Figure 7
Mount Assembly General View (CPU Box Mount at front)
Figure 9
MW 800 on Mount Assembly (CPU Box at front)