Mw 800 Gps Antenna - Motorola MW 800 Series Vehicle Installation Manual

16 MW 800 Vehicle Installation Guide
The CPU box can be mounted anywhere in the passenger compartment of the vehicle that
provides adequate ventilation (see Figure 2).
It is recommended that the CPU box be mounted in a place where the PC Card slot can be
easily accessed.
In addition, attach the adhesive tapes provided in the shipping carton to the PC Card to
facilitate easy removal.
Suggested locations, in order of preference, are: on the CPU box mount, on the prisoner cage,
under the dashboard, in the console, or under the seat (not in the direct path of the vehicle
heater air flow). If the CPU box is mounted on the base plate of the mount assembly, it must
be mounted using the CPU box mount.
The CPU box mount can be affixed to the base plate in two possible orientations (see Figure
8 and Figure 9):
1. On the base plate, directly under the keyboard tray (see Figure 9).
2. On the base plate, using different mounting holes in the opposite direction to the
keyboard tray (see Figure 8).

MW 800 GPS Antenna

To install the GPS antenna, perform the following steps:
Step 1. Drill a hole into the mounting surface for the antenna post.
Step 2. Release the nut and the flat washer from the antenna post and insert the post into the
hole.
Step 3. Secure the post with the flat washer and the nut.