Table of Contents
Advertisement
Removing a PC card
To remove the PC card, follow the steps below.
1. Open the Safety Remove Hardware icon on the system tray and
2. Press the eject button of the PC card you want to remove to extend
3. Press the extended eject button to pop the card out slightly.
4. Grasp the PC card and remove it.
Memory expansion
You can install additional memory in the computer's memory module to
increase the amount of RAM.
Only memory modules with the following parts numbers can be installed:
PA3127U-1M25
PA3164U-1M51
PA3278U-1M1G
Installing memory module
To install a memory module, make sure the computer is in boot mode
then:
1. Turn the computer off in boot mode. Refer to the Turning off the
TOSHIBA TE2300
disable the PC card.
the button.
PC
CARD
power section in Chapter 3.
Removing the PC card
256 MB
512MB
1024MB
Optional Devices
8-3
Advertisement
Table of Contents
