Table of Contents
Advertisement
2. Plug one end of the cable into the LAN jack. Press gently until you
hear the latch click into place.
3. Plug the other end of the cable into a LAN hub connector. Check
with your LAN administrator before connecting to a hub.
When the computer is exchanging data with the LAN, the LAN active
indicator glows orange. When the computer is connected to a LAN hub
but is not exchanging data, the Link indicator glows green.
Disconnecting a LAN cable
To disconnect the LAN cable, follow the steps below.
Make sure the LAN active indicator (orange LED) is out before you
disconnect the computer from the LAN.
1. Pinch the lever on the connector in the computer's LAN jack and pull
out the connector.
2. Disconnect the cable from the LAN hub in the same manner. Check
with your LAN administrator before disconnecting from the hub.
TOSHIBA TE2300
Connecting the LAN cable
Operating Basics
4-23
Advertisement
Table of Contents
