Table of Contents
Advertisement
LCD panel
Apparent LCD problems may be related to the computer's setup. Refer to
Chapter 7, HW Setup and Passwords, for more information.
Problem
No display
Markings appear on the
LCD
Problems above remain
unresolved or other
problems occur
Hard disk drive
Problem
Computer does not
boot from hard disk
drive
Slow performance
TOSHIBA TE2300
Procedure
Press hotkeys Fn + F5 to change the display
priority, to make sure it is not set for an external
monitor.
They might have come from contact with the
keyboard or AccuPoint II. Try wiping the LCD
gently with a clean dry cloth. If markings remain,
use LCD cleaner. Be sureto let the LCD dry
before closing it.
Refer to your software's documentation to
determine if the software is causing the difficulty.
Contact your dealer if the problems continue.
Procedure
Check if a diskette is in the diskette drive or a
CD-ROM is in the optical media drive. Remove
any diskette and/or CD-ROM and check Boot
priority. Refer to the Boot Priority section in
Chapter 7, HW Setup and Passwords.
There may be a problem with your operating
system files. Refer to your OS documentation.
Your files may be fragmented. Run SCANDISK
and defragmenter to check the condition of your
files and disk. Refer to your OS documentation
or online HELP for information on running
SCANDISK and the defragmenter.
As a last resort, reformat the hard disk. Then,
reload the operating system and other files.
If problems persist, contact your dealer.
Troubleshooting
9-7
Advertisement
Table of Contents
