Restarting The Computer - Toshiba TE2300 User Manual

3. Press the power button. This feature must be enabled. Refer to the
When you turn the power back on, you can continue where you left when
you shut down the computer.
1. When the computer is shut down in standby mode, the power
indicator glows orange.
2. If you are operating the computer on battery power, you can lengthen
the operating time by shutting down in hibernation mode. Standby
mode consumes more power.
Standby limitations
Standby will not function under the following conditions:
Power is turned back on immediately after shutting down.
Memory circuits are exposed to static electricity or electrical noise.

Restarting the computer

Certain conditions require that you restart the computer system. For
example, if:
You change certain computer settings.
An error occurs and the computer does not respond to your keyboard
commands.
There are three ways to restart the computer system:
1. Click start then click Turn off computer. From the Turn off computer
menu select Restart.
2. Press Ctrl + Alt + Del to display the Windows Task Manager, then
select Shutdown and Restart.
3. Press the power button and hold it down for five seconds. Wait 10 to
15 seconds, then turn the power on again by pressing the power
button.
Restoring the preinstalled software
If preinstalled files are damaged, use the Product Recovery CD-ROM or
the TOSHIBA Tools & Utilities CD-ROM to restore them.
TOSHIBA TE2300
Open Performance and Maintenance and open TOSHIBA Power
Saver.
System Power Mode item in Power Saver Utility described in the
Control Panel.
Open Performance and Maintenance and open TOSHIBA Power
Saver.
Getting Started
3-10