Table of Contents
Advertisement
Serial mouse
This section applies only with Windows
You cannot use a serial mouse with Windows
Problem
On-screen pointer
does not respond to
serial mouse operation
USB mouse
Problem
On-screen pointer
does not respond to
mouse operation
Double-clicking does
not work
The mouse pointer
moves too fast or too
slow
The mouse pointer
moves erratically
TOSHIBA TE2300
®
XP operating systems.
Procedure
Check for a firm connection between the
computer's serial port and the cable's 9-pin
connector.
Did you connect the mouse before turning on the
computer?
Is your software configured to recognize the
mouse? Check the software documentation.
If problems persist, contact your dealer.
Procedure
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Make sure the mouse is properly connected to
the USB port.
Try changing the double-click speed setting in
the mouse control utility.
1. Open the Control Panel
icon and press Enter.
2. Click the Buttons tab.
3. Set the double-click speed as instructed
and click OK.
Try changing the speed setting in the mouse
control utility.
1. Open the Control Panel
icon and press Enter.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
The mouse might be dirty. Refer to your mouse
documentations for instructions on cleaning.
If problems persist, contact your dealer.
Troubleshooting
®
2000.
,
select the Mouse
,
select the Mouse
9-13
Advertisement
Table of Contents
