Table of Contents
Advertisement
2. Enter the password.
3. Press Enter. The computer displays the message below while it
starts up.
Valid password entered, system is now starting
up.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.
Power-up modes
The computer has the following power-up modes:
Boot : Computer shuts down without saving data. Always save your
work before you turn the computer off in boot mode.
Hibernation : Data in memory is saved to the hard disk.
Standby : Data is maintained in the computer's main memory.
Refer also to the sections Turning on the power and Turning off the power
in Chapter 3, Getting Started.
Windows utilities
You can specify the setting in TOSHIBA Power Saver.
Hotkeys
You can use hotkeys Fn + F3 to enter Standby mode and Fn + F4 to enter
Hibernation. See Chapter 5, The Keyboard, for details.
Panel power off
You can set up your computer so that power turns off automatically when
you close the display panel. When you open the panel, power turns on in
Standby or Hibernation mode but not in boot mode.
If the panel power off function is enabled and use Shut down Windows,
do not close the display until the shut down function is completed.
System Auto Off
This feature turns the system off automatically if it is not used for a set
duration. The system shuts down in Standby mode or Hibernation mode
in windows.
TOSHIBA TE2300
Password =
Power and Power-Up Modes
6-14
Advertisement
Table of Contents
