TOSHIBA TE2300
TOSHIBA TE2300
Internal Modem Guide
This appendix describes how to install and the remove the internal
modem.
Do not disassemble the computer beyond the steps described in this
instruction or touch any components not specifically described.
Installing the modem board
The internal modem is preinstalled. The following is for information only.
To install the modem board, follow the steps below.
1. Save your data, quit Windows and turn off the power.
2. Disconnect the AC adaptor and any other peripheral devices.
3. Turn the computer upside down and remove the battery pack.
4. Remove one screw securing the modem cover and remove the
5. Remove two screws, which you use later to secure the modem
6. Seat the modem board.
7. Connect the modem board cable.
8. Secure the modem board with two screws removed in step 5.
9. Seat the modem board cover and secure it with one screw.
10. Install the battery pack.
User's Manual
User's Manual
TOSHIBA TE2300
cover.
board.
G.
Appendix G
If your computer is stolen
7-G-1
G-1
G-1