Preparation; Enter Your Call Sign Into The Transceiver - Icom ID-51A Basic Instructions

New2001
Before starting D-STAR, entering and registering your call sign (MY) are needed, as described below.
IMPORTANT!
STEP 1
gateway repeater.
STEP 1

Enter your call sign into the transceiver

Example: Enter "JA3YUA" as your own call sign into the MY
call sign memory [MY1].
Hold down [ ] for 1 second to
q
turn ON the power.
] for 1 second to
turn OFF power.
power source voltage are dis-
played, the operating frequency
appears.
[ ]
New2001

PREPARATION

Push D-pad( !) to select MY
t
call sign memory channel "1"
([MY1]).
D-pad
(Ent)
( )
Push [QUICK]
y
push D-pad(!) to select
"Edit." Then, push D-pad(Ent)
to enter the call sign edit
mode.
Rotate [DIAL] to select the
u
first digit. (Example: J)
selectable.
Move cursor, then rotate
[DIAL].
to enter a space.
Keys used for input
Selects/exits the
MENU screen
Moves the
cursor
3
Entering your call sign (MY) into the transceiver.
You have completed the steps!!
, and then
").
Edit mode
.
Go to step o
[DIAL]
Selects
Deletes
Shows the
QUICK MENU
PREPARATION
STEP 2
Registering your call sign (MY) to a
Push [MENU] .
w
MENU screen is displayed.
Push D-pad( !) to select the
e
root item ("My Station"), and
then push D-pad(Ent).
D-pad
(Ent)
( )
Push D-pad( !) to select "My
r
Call Sign," and then push D-
pad(Ent).
displayed.
Continued on the next page
Push D-pad(#) to move the
i
cursor to the second digit.
NOTE: Your call sign must
match the call sign registered
to your gateway repeater. (p. 4)
Repeat steps u and i to
o
enter your own call sign of
up to 8 characters, including
spaces.
( For example: First J, then A,
then 3, then Y, then U, then A)
!0 Push D-pad(Ent) to set the
call sign.
note.
!1 Push D-pad(Ent) again to
save and return to the MY
CALL SIGN screen.
!2 Push [MENU] to exit the
MENU screen.
MENU screen
Go to step t
This is page 2.
Beeps
Completed
New2001