Step2 Set "To" (Destination); Step3 Hold Down [Ptt] To Transmit; Calling A Destination Station; Step1 Set "From" (Access Repeater) - Icom ID-51A Basic Instructions

New2001 New2001
STEP 2 Set "TO" (Destination)
Push D-pad( %) to select "TO,"
q
and then push D-pad(Ent).
D-pad
(Ent)
( )
Push D-pad( !) to select
w
"Gateway CQ," and then push
D-pad(Ent).
Push D-pad( !) to select the
e
repeater group where your
destination repeater is listed,
and then push D-pad(Ent).
Push D-pad( !) to select the
r
destination repeater,
then push D-pad(Ent).
New2001
6

CALLING A DESTINATION STATION

tion station call sign is selected in "TO" (Destination).
When you call an individual station call sign through a gate-
way, the signal is automatically sent to the last repeater that
the station accessed. So, even if you don'
Repeater
31
and
Repeater
MAKING A GATEWAY CALL
STEP 3 Hold down [PTT] to transmit
at your normal voice level.
it is a repeater call sign.
< Communication example
for a Gateway call>
JA3YUA, this is JM1ZLK.
Hello, how are you?
JM1ZLK, this is JA3YUA.
JM1ZLK
Thanks for the nice QSO and I
hope to talk to you again soon.
This is JA3YUA now clear of
the JP3YHH repeater.
Convenient!
The Gateway CQ call is used to call any repeater, but you can
call a specific station by simply saying their call sign.
-
Set "FROM" (Access repeater)
STEP 1
Push D-pad( !) to select
q
"FROM," and then push D-
pad(Ent).
D-pad
(Ent)
( )
Push D-pad( !) to select "Re-
w
peater List," and then push
D-pad(Ent).
Push D-pad( !) to select the
e
repeater group where your
access repeater is listed, and
then push D-pad(Ent).
Push D-pad( !) to select your
r
access repeater, and then
push D-pad(Ent).
Transmitting
JA3YUA calling to
JP1YIU port A.
JA3YUA
JA3YUA
5
5
30
New2001