Power Cable - HP Chromebook x360 11 G3 Education Edition Maintenance And Service Manual

Power cable

NOTE: The power cable is included in the Cable Kit, spare part number L92200-001.
Before removing the power cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Disconnect the battery cable from the system board (see
6. Remove the WLAN module (see
7. Remove the system board (see
Remove the power cable:
1. Turn the system board upside down with the rear toward you.
2. Disconnect the power cable from the system board.
Reverse this procedure to install the power cable.
Keyboard/top cover on page
WLAN module on page 37).
System board on page 42).
24).
Battery on page 35).
Component replacement procedures 45