Wlan Module - HP Chromebook x360 11 G3 Education Edition Maintenance And Service Manual

WLAN module

Table 5-6 WLAN module spare part information
Description
Intel 9560 ac 2×2 + Bluetooth 5.0 MU-MIMO M.2 2230 non-vPro WLAN module
WLAN bracket (included in the Bracket Kit, spare part number L92206-001)
IMPORTANT:
authorized for use in the computer by the governmental agency that regulates wireless devices in your country
or region. If you replace the module and then receive a warning message, remove the module to restore device
functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Disconnect the battery cable from the system board (see
Remove the WLAN module:
1. Remove the Phillips M2.0×2.9 screw (1) that secures the WLAN module to the system board. (The WLAN
module tilts up.)
2. Remove the WLAN bracket (2).
The WLAN bracket is included in the Bracket Kit, spare part number L92206-001.
3. Disconnect the WLAN antenna cables (3) from the terminals on the WLAN module.
NOTE:
WLAN antenna cable connects to the WLAN module #2/Aux terminal.
4. Release the shielding (4) that secures the WLAN module to the slot.
To prevent an unresponsive system, replace the wireless module only with a wireless module
The #1/white WLAN antenna cable connects to the WLAN module #1/Main terminal. The #2/ black
Keyboard/top cover on page
Battery on page
Spare part number
L22634-005
24).
35).
Component replacement procedures 37