Table of Contents
Advertisement
Power cable
Description
Power cable
Before removing the power cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Place the computer in "Battery Safe mode"
3.
Disconnect all external devices connected to the computer.
4.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
5.
Remove the following components:
a.
Service door
b.
Hard drive
c.
Keyboard
d.
Top cover
e.
Card reader board
f.
Battery
g.
Display assembly right hinge
Remove the power cable:
1.
Disconnect the cable from the system board (1).
2.
Remove the power cable from the computer (2).
Reverse this procedure to install the power cable.
70
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
(Service doors on page
(Hard drive on page
34)
(Keyboard on page
37)
(Top cover on page
41)
(Card reader board on page
(Battery on page
57)
Display assembly on page
(Battery Safe mode on page
28).
52)
65)
Spare part number
L07857-001
27).
Advertisement
Table of Contents
