Parameterization And Commissioning; Configuration Overview; Overview Of Process Data; Ek1814 - Beckhoff EK18 Series Documentation

6

Parameterization and commissioning

6.1

Configuration overview

More detailed information on the configuration settings can be found in the EtherCAT system documentation
on the Beckhoff website.
6.2

Overview of process data

In the TwinCAT System Manager, enter the EK18xx as an EtherCAT (Direct mode) device in Config mode
under Devices. If the Bus Coupler is already connected to the network, it can be read. This will cause all the
Bus Couplers with Bus Terminals and their configurations to be loaded. You can then adapt these to meet
your requirements.
6.2.1

EK1814

Fig. 34: TwinCAT tree EK1814
EK18xx
Parameterization and commissioning
Version: 2.2 41