Ethercat State Machine; Fig. 9 System Manager Current Calculation; Fig. 10 States Of The Ethercat State Machine - Beckhoff EK18 Series Documentation

Fig. 9: System manager current calculation
Malfunction possible!
The same ground potential must be used for the E-Bus supply of all EtherCAT terminals in a terminal block!
3.3

EtherCAT State Machine

The state of the EtherCAT slave is controlled via the EtherCAT State Machine (ESM). Depending upon the
state, different functions are accessible or executable in the EtherCAT slave. Specific commands must be
sent by the EtherCAT master to the device in each state, particularly during the bootup of the slave.
A distinction is made between the following states:
• Init
• Pre-Operational
• Safe-Operational and
• Operational
• Boot
The regular state of each EtherCAT slave after bootup is the OP state.
Fig. 10: States of the EtherCAT State Machine
EK18xx
NOTE
Version: 2.2
Basic principles
15