Banner SureCross DX80 Series Manual page 4

Terminal Block
GND GND
AO2 AO1
AI2 AI1
PWR PWR
GND
GND
DO2 DO1
DI2 DI1
Wiring Diagrams for Discrete Inputs
Connecting dc power to the communication pins will cause permanent damage. For the DX8x...C models, PWR in the wiring diagram
refers to V+ on the wiring board and GND in the wiring diagram refers to V- on the wiring board.
Discrete Input Wiring for PNP Sensors
PWR
10-30V dc
DIx
Wiring Diagrams for Discrete Outputs
Connecting dc power to the communication pins will cause permanent damage. For the DX8x...C models, PWR in the wiring diagram
refers to V+ on the wiring board and GND in the wiring diagram refers to V- on the wiring board.
Discrete Output Wiring (PNP)
PWR
DOx
Load
GND
Wiring Diagrams for Analog Inputs
Connecting dc power to the communication pins will cause permanent damage. Do not exceed analog input ratings for analog inputs.
Only connect sensor outputs to analog inputs.
4
AIx or Ax. Analog IN x.
AOx. Analog OUT x.
DIx. Discrete IN x.
DOx. Discrete OUT x.
GND. Ground/dc common connection.
PWR. Power, 10 to 30V dc power connection.
10-30V dc
dc common
www.bannerengineering.com - tel: 763-544-3164
Discrete Input Wiring for NPN Sensors
DIx
GND
dc common
SureCross DX80 Node
P/N 131295 Rev. F