Starting Machine And Other Checks/Verifications - Volvo DD29 Operator's Manual

SECTION 4
17. Turn ignition switch (11, Figure 4-11) to ON position, and verify that the
following occurs:
a. Park Brake
b. Indicator lights (7, Figure 4-11) turn ON.
18. Press horn button (10, Figure 4-11) to verify that horn is operational.
19. To confirm that engine will only start with the propulsion control in the STOP
position, move propulsion control lever
direction away from the STOP position.
20. Make sure no personnel are close to the machine, with the brake applied, turn
the ignition key
not start, verifying that the machine will not start with the propulsion control
lever in a position other than the STOP position.
21. Return ignition switch (11, Figure 4-11) to the stop position.
22. Place the propulsion control lever
(center) position.

STARTING MACHINE AND OTHER CHECKS/VERIFICATIONS

Starting procedure and checks and verifications while engine running.
NOTE: If any controls or devices do not function correctly, call for
service.
1. Be sure water spray switch (3, Figure 4-12) is in the OFF (center) position.
4-8
switch indicator light (9, Figure 4-11) turns ON.
(11, Figure 4-11) to the Start position. The engine should
Figure 4-12
OPERATING INSTRUCTIONS
(14, Figure 4-9) in either
(14, Figure 4-9) in the STOP
DD-29/31HF/38HF Vibratory Asphalt Compactors