Installing A Psu; Removing A Psu - Dell EMC DP5300 Field Replacement Manual

Installing a PSU

Figure 6 Removing a PSU
1. Release latch
2. Power cable connector
3. PSU
4. Power connector
5. Handle
Note
Save the packing material to return the faulted PSU.
Procedure
1. Verify that the PSU being installed is of the same type and has the same
maximum output power as the existing PSU.
The maximum power output (shown in watts) is listed on the PSU label.
2. Slide the new PSU into the chassis until the PSU is fully seated and the release
latch snaps into place.
Note
If you unlatched the cable management arm, re-latch it. For information about
the cable management arm, see the system's rack documentation.
3. Connect the power cable to the PSU and plug the cable into a power outlet.
CAUTION
When connecting the power cable, secure the cable with the strap.
DELL EMC CONFIDENTIAL
Dell PowerEdge R630 Server FRUs
Installing a PSU
43