Connect Power Cords And Network Cables; Install Switch In Cabinet - Dell EMC DP5300 Field Replacement Manual

DELL EMC CONFIDENTIAL
Dell S4048-ON Switch FRUs

Connect power cords and network cables

Integrated Data Protection Appliance (IDPA) 2.1 Field Replacement Guide
86
Figure 26 Install switch in cabinet
1. Switch
2. Rail bracket
3. Mounting screw
Note
When working with optical fibers, follow all the warning labels and always wear eye
protection. Never look directly into the end of a terminated or unterminated fiber or
connector as it may cause eye damage.
Procedure
1. Connect the AC power cords to the PSU 1 and PSU 2 power connectors.
Note
When an AC power cord is connected to a PSU, the switch power is turned on.
2. Using the connection information that is recorded on the labels, connect the
network and I/O cables to ports on the front of the switch.
Position the optic so it is in the correct position. The optic has a key that
l
prevents it from being inserted incorrectly.
Insert the optic into the port until it gently snaps into place.
l