Led Descriptions; Front Panel Leds; Enclosure Bezels; Enclosure Bezel Attachment And Removal - Lenovo D1012 Hardware Installation And Maintenance Manual

Table of Contents

Advertisement

3

LED descriptions

Front panel LEDs

The D1012/D1024 enclosures support 2U24 and 2U12 enclosures. The 2U24 chassis is configured with
24 2.5" small form factor (SFF) disks. The 2U12 chassis is configured with 12 3.5" large form factor (LFF)
disks.

Enclosure bezels

Each D1012/D1024 enclosure is equipped with a removable bezel designed to cover the front panel
during enclosure operation. The bezels look very similar, but there are differences between the two models.
The bezel fitting the 2U24 chassis provides two embossed pockets used during bezel removal
whereas the bezel fitting the 2U12 chassis provides two debossed pockets, is equipped with an EMI
(Electromagnetic Interference shield), and may or may not be equipped with the serviceable dust filtration
air filter option

Enclosure bezel attachment and removal

When you initially attach or remove the front panel enclosure bezel for the first time, refer to the
appropriate pictorials for your enclosure(s) from the list below, and follow the instructions provided.
• Front view of 24-Storage Enclosure (2U24):
• Front view of 12-Storage Enclosure (2U12):
• Bezel alignment for 24-Storage Enclosure (2U24):
• Bezel alignment for 12-Storage Enclosure (2U12):

Enclosure bezel attachment

Orient the enclosure bezel to align its back side with the front face of the enclosure as shown in
page 19 and
bezel, position it such that the mounting sleeves within the integrated ear caps align with the ball studs,
and then gently push-fit the bezel onto the ball studs to securely attach the bezel to the front of the
enclosure.

Enclosure bezel removal

While facing the front of the enclosure, insert the index finger of each hand into the top of the respective
(left or right) pocket opening, and insert the middle finger of each hand into the bottom of the respective
18
(Figure
6).
Figure 5 Front panel enclosure bezel: 24-Storage Enclosure (2U24)
Figure 6 Front panel enclosure bezel: 12-Storage Enclosure (2U12)
Figure 8
on page 19. Face the front of the enclosure, and while supporting the base of the
Figure 5
Figure 6
Figure 7
on page 19
Figure 8
on page 19
(Figure
5);
Figure 7
on

Advertisement

Table of Contents
loading

This manual is also suitable for:

D1024

Table of Contents