Table of Contents
Advertisement
NOTE: Front and rear panel LEDs for Storage Enclosures are described in
12-Storage Enclosure front panel components
The illustration in this document of 2U24 front panel components is identical for D1012 and D1024 Storage
Enclosures.
Note: Remove this enclosure bezel to access the front panel components shown below.
Left ear
1
Note: Integers on disks indicate drive slot numbering sequence.
1 Enclosure ID LED
2 Disk drive status LED: Fault
3 Disk drive status LED: Power/Activity
4 3.5" disk or drive blank (typical 12 slots)
TIP: See
Enclosure bezel attachment and removal
NOTE: Front and rear panel LEDs for Storage Enclosures are described in
Disk drives used in D1012/D1024 enclosures
D1012/D1024 enclosures support LFF/SFF Midline SAS, LFF/SFF Enterprise SAS, and SFF SSD disks.
16
0
4
8
2
3
Figure 3 2U12 enclosure: front panel
1
5
10
9
4
5 Enclosure status LED: Unit locator
6 Enclosure status LED: Fault/Service Required
7 Enclosure status LED: CRU OK
8 Enclosure status LED: Temperature Fault
on page 18 and
LED
descriptions.
5
6
7
8
2
6
5
5
6
6
7
7
OK
8
8
(Silk screens on bezel)
Figure 8
on page 19 (2U12).
LED
descriptions.
OK
Right ear
3
7
1 1
Advertisement
Table of Contents
