Table of Contents
Advertisement
Extract SFF disk or blank
Installing a disk drive module
1. Follow one of the two sub-steps below, according to your product disk drive module type:
a. SFF disk — Squeeze the latch release flanges together, and then pull the latch, rotating it upward
until it is fully open (see
b. LFF disk — No action required.
Proceed to
2. Follow one of the two sub-steps below, according to your product disk drive module type:
a. SFF disk — With the LEDs oriented to the bottom, slide the disk drive module into the drive slot as
far as it will go (see left illustration in
b. LFF disk — With the LEDs oriented to the left, slide the disk drive module into the drive slot as far as
it will go (see right illustration in
3. Follow one of the two sub-steps below, according to your product's disk drive type:
a. SFF disk — Rotate the latch downward until it clicks closed to firmly seat the disk drive module in the
enclosure midplane.
b. LFF disk — Verify that you have inserted the disk drive module into the slot as far as it will go, to
ensure that the module is firmly seated in the enclosure midplane.
The installed disk drive module should now appear as shown in
48
Figure 32 Removing a disk drive module
Figure 31
step 2
below.
Insert SFF disk or blank
Figure 33 Installing a disk drive module
on page 47 and
Figure
Figure
33).
Figure
33).
Extract LFF disk or blank
32).
Insert LFF disk or blank
Figure 31
on page 47.
Advertisement
Table of Contents
