1. Cassette door
2. On/Off switch (external drives
only)
3. Clean LED
4. Tape LED
Figure 5-4 Front view of half-height LTO–4 and LTO–3 external tape drive
Understanding LED sequences
The LED sequences in the following table relate to the Ready, Drive (Error),
Tape (Error) and Clean LEDs. The LTO–5 tape drive also has an Encryption
LED that describes encryption status. This is described separately in
"Encryption
without encryption enabled, is as follows:
November 2012
LED" on page 48. The meaning of different patterns of LEDs,
Understanding LED sequences
5. Drive LED
6. Ready LED
7. Eject button
#
45