Removing The Battery Pack - Toshiba M700/M710 User Manual

User's manual portg m700/m710
Table of Contents

Advertisement

Removing the battery pack

To remove a discharged battery, follow the steps as detailed below:
1. Save your work.
2. Turn the computer's power off - ensure that the Power indicator is off.
3. Remove all cables and peripherals that are connected to the computer.
4. Close the display panel and turn the computer upside down.
Always make sure the display panel is closed in Laptop mode before
turning the computer upside down.
5. Slide the battery lock towards the release (
battery release latch movable.
Battery pack
6. Slide and hold the battery release latch (1) to disengage the battery
pack and then remove it from the computer (2).
Battery release
latch
User's Manual
Figure 6-1 Releasing the battery pack (1)
Figure 6-2 Releasing the battery pack (2)
Power and Power-Up Modes
) position to make the
Battery lock
Battery pack
6-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Portege m710Portege m700 series

Table of Contents