Table of Contents
Advertisement
4. Turn the computer's power on.
When you turn on the power, the computer will automatically recognize the
monitor and determine whether it is a color or monochrome device. In the
event that you find that there are issues getting an image displayed on the
correct monitor, you should consider using the FN + F5 hot key to change
the display settings (if you then disconnect the external monitor before you
turn the computer's power off, be sure to press FN + F5 hot key again to
switch to the internal display).
Please refer to Chapter 5,
keys to change the display setting.
Do not disconnect the external monitor while in Sleep or Hibernation Mode.
Turn off the computer before disconnecting the external monitor.
USB
The computer is equipped with the Universal Serial Bus ports that can
accommodate some kinds of devices.
These ports comply with the USB 2.0 standard.
USB FDD Kit
The USB floppy diskette drive accommodates either a 1.44MB or 720KB
floppy diskette and connects to one of the computer's USB ports.
USB connector
User's Manual
The
Disk-In-Use
Indicator
Floppy
diskette slot
Eject button
Figure 3-26 The USB floppy diskette drive
Hardware, Utilities and Options
Keyboard, for further details on using hot
3-38
Advertisement
Table of Contents
