Toshiba M70 User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite M70
  6. User manual

Toshiba M70 User Manual

Toshiba portable personal computer user's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

User's Manual
M70

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M70 and is the answer not in the manual?

Questions and answers

Related Manuals for Toshiba M70

Summary of Contents for Toshiba M70

  • Page 1 User’s Manual...
  • Page 2 Disclaimer This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for the M70 Portable Personal Computers at the time of this manual’s production. However, succeeding computers and manuals are subject to change without notice.

  • Page 3: Safety Instructions

    TruSurround XT, WOW XT, SRS and Labs, Inc. TruSurround XT, WOW XT, TruBass, SRS 3D and FOCUS technologies are incorporated under license from SRS Labs, Inc. Other trademarks and registered trademarks not listed above may be used in this manual. Macrovision License of Notice This product incorporates copyright protection technology that is protected by methods and claims of certain U.S.
  • Page 4 ■ Before you connect the computer to a power source, ensure that the voltage rating of the AC adapter matches that of the available power source. 115 V/60Hz in most of North and South America and some Far Eastern countries such as Taiwan. 100 V/50Hz in eastern Japan and 100 V/60Hz in western Japan.
  • Page 5 When using telephone equipment in conjunction with your computer, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: ■ Do not use this product near water, for example, near a bathtub, washing bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
  • Page 6 This computer is equipped with one of the optical drive in the following list according to the model Panasonic Communications Co., LTD. TOSHIBA Samsung Storage Technology Hitachi LG Data Storage, Inc. Panasonic Communications Co., LTD. TEAC Hitachi LG Data Storage, Inc.
  • Page 7 International precautions ■ This drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
  • Page 8 VORSICHT: Dieses Gerät enthält ein Laser- System und ist als “LASERSCHUTZKLASSE 1 PRODUKT” klassifiziert. Für den richtigen Gebrauch dieses Modells lesen Sie bitte die Bedienungsanleitung sorgfältig durch und bewahren diese bitte als Referenz auf. Falls Probleme mit diesem Modell auftreten, benachrichtigen Sie bitte die nächste “autorisierte Service-Vertretung”.
  • Page 9 Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.

  • Page 10: Important Notice

    Important Notice Copyrighted works including, but not limited to music, video, computer program, databases are protected by copyright laws. Unless specifically permitted under applicable copyright laws, you cannot copy, modify, assign, transmit or otherwise dispose of any copyrighted work with the consent of the owner of the copyright.

  • Page 11: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
  • Page 12 Mobile phone Use of mobile phones can interfere with the audio system. Computer operation is not impaired but it is recommended that a distance of 30 cm be maintained between the computer and a mobile phone in use. Over a period of time, and depending on the usage of the computer, the brightness of the LCD screen will deteriorate.
  • Page 13 Graphics Processing Unit (“GPU”) Performance Disclaimer: The graphics processing unit (“GPU”) performance may vary depending on product model, design configuration, applications, power management settings and features utilized. GPU performance is only optimized when operating in AC power mode and may decrease considerably when operating in battery power mode. Main Memory Disclaimer The graphics system in your computer may use part of the main system memory for graphics performance and therefore reduce the amount of...

  • Page 14: Express Media Player

    Images All images are simulated for purposes of illustration. Express Media Player The Express Media Player is not a Windows will be less than when using similar applications in the Windows operating system. LCD Brightness and Eye Strain Your LCD display has a brightness approaching that of a TV device. We recommend that you adjust the brightness of your LCD to a comfortable level to prevent possible strain on your eyes.
  • Page 15 Network connection (Class A warning) If this product has networking capabilities and will be connected to a network, Class A radiation limits will be observed (in accordance with technical conventions). This means that if the product will be used in a domestic environment, other devices in the near surrounding area may suffer interference.
  • Page 16 Safety Instruction for Wireless Products If your computer has a wireless function, all safety instructions must be read carefully and must be fully understood, before you attempt to use it. This manual contains the safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries or could damage your wireless products.
  • Page 17 Warning Turn OFF the Wireless Communication switch of wireless products in a congested place, such as a crowded commuter train. Keep this product away from a cardiac pacemaker at least 22cm. Radio waves can potentially affect cardiac pacemaker operation, thereby causing respiratory troubles.
  • Page 18 xviii User’s Manual...

  • Page 19: Table Of Contents

    Table of Contents General Precautions Preface Introduction Chapter 1 Features..........1-3 Special features .
  • Page 20 Operating Basics Chapter 4 Using the Touch Pad ........4-1 Using the internal modem .
  • Page 21 Optional Devices Chapter 8 PC Card ..........8-2 ExpressCard .
  • Page 22 xxii User’s Manual...

  • Page 23: Preface

    This manual tells how to set up and begin using your M70 computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
  • Page 24 Chapter 7, program. Chapter 8, Optional Chapter 9, Troubleshooting, provides helpful information on how to perform some diagnostic tests, and suggests courses of action if the computer doesn’t seem to be working properly. The Appendices provide technical information about your computer. The Glossary defines general computer terminology and includes a list of acronyms used in the text.
  • Page 25 Display Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. User’s Manual Preface...
  • Page 26 Preface xxvi User’s Manual...
  • Page 27 Introduction This chapter provides an equipment checklist, and it identifies the computer’s features, options and accessories. User’s Manual Chapter 1...
  • Page 28 Software Microsoft ® Windows ■ The following software which is preinstalled on your hard disk: ■ Microsoft ■ TOSHIBA Utilities ■ DVD Video Player ■ TOSHIBA Power Saver ■ TOSHIBA ConfigFree ■ TOSHIBA Assist ■ TOSHIBA Controls ■ TOSHIBA PC Diagnostic Tool ■...

  • Page 29: Features

    Features The M70 computer uses TOSHIBA’s advanced Large Scale Integration (LSI), Complementary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight, low power usage, and high reliability. This computer incorporates the following features and benefits: Processor Chip Set...
  • Page 30 Slot L2 Cache Video RAM Two DDRII SO-DIMM up to 2GB can be upgraded through memory expansion slot. Maximum upgradeable system memory may depend on the model you purchased. Depending on the model you purchased: ® 1MB L2 Cache (Intel Celeron ®...
  • Page 31 BIOS Power Battery Pack RTC Battery AC adapter Floppy Disk Drive devices TouchPad User’s Manual 1MB Flash ROM for system BIOS Suspend to memory or hard disk drive Hardware password protection Various Hotkey functions for system control Complete ACPI 1.0b functionality 4-cell Lithium Ion smart battery pack with 14.4V*2000mAh 6-cell Lithium Ion smart battery pack with...
  • Page 32 Display Disks Fixed hard disk CD-RW/DVD-ROM drive 15.4” TFT screen with a resolution of 1280 horizontal x 800 vertical pixels WXGA Depending on the model purchased, one of the following drives will be installed: 40.0 billion bytes (37.26GB) 60.0 billion bytes (55.88GB) 80.0 billion bytes (74.52GB) 100.0 billion bytes (93.16GB) 120.0 billion bytes (111.78GB)
  • Page 33 DVD Super Multi drive supporting ±R Double Layer Computers in this series can be configured with multiple types of optical disc drive. For more information on the optical disc drives available, talk to your dealer. More information on using the optical disc drive can be found in Chapter 4, User’s Manual Some models are equipped with a full-size DVD...
  • Page 34 Slots (depending on configuration) PC Card Multiple Digital Media Card (SD/ MMC/MS/MS Pro/xD) Express Card Ports (depending on configuration) External monitor Universal Serial Bus i.LINK (IEEE1394) TV Out Multimedia Sound system Express Media Player Accommodates one type II device. This slot lets you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, that use flash-memory.
  • Page 35 Headphone jack Microphone jack Communications Modem Wireless LAN Bluetooth (depends on the model you purchased) Security Security Lock Slot User’s Manual A standard 3.5mm stereo jack is provided for the connection of external headphones or speakers. A standard 3.5 mm mini microphone jack enables connection of monaural microphone input.

  • Page 36: Special Features

    Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hotkeys Display Automatic Power off Hard Disk Drive Automatic Power Off System Automatic Standby/Hibernation Keypad Overlay Power-on Password Battery Save Mode Instant Security Panel Power Off/On...

  • Page 37: Utilities

    Low Battery Automatic Hibernation Hibernation Standby ■ Before entering Standby mode, be sure to save your data. ■ Do not install or remove a memory module while the computer is in Standby mode. The computer or the module could be damaged. ■...
  • Page 38 TOSHIBA PC Diagnostic Tool TOSHIBA Controls DVD Player ConfigFree TOSHIBA TouchPad On/Off Utility RecordNow! Basic for TOSHIBA 1-12 TOSHIBA PC Diagnostic tool displays the basic information on the computer’s configuration and allows some of the built-in devices functionality to be tested. You can start the TOSHIBA PC Diagnostic Tool as follows: Start ->...
  • Page 39 DLA for TOSHIBA TOSHIBA Touch and Launch TOSHIBA Zooming Utility TOSHIBA HW Setup TOSHIBA Fn-esse TOSHIBA Accessibility User’s Manual DLA (Drive Letter Access) is the packet writing software which provides the function to write files and/or folders to DVD+RW, DVD-RW or CD-RW media via a drive letter like a floppy disk or other removable disk media.

  • Page 40: Options

    TOSHIBA Virtual Sound CD/DVD Drive Acoustic Silencer Options You can add a number of options to make your computer even more powerful and convenient to use. The following options are available: Memory Modules Use only PC4200 compatible DDRII memory modules. See your TOSHIBA dealer for details Battery Pack AC adapter...

  • Page 41: Chapter 2 The Grand Tour

    The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Certain types of notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
  • Page 42 DC IN LED Power LED Battery LED Hard Disk Drive LED Multiple Digital Media Card Slot Access LED* Multiple Digital Media Card Slot* Wireless Communication Switch* Wireless Communication LED* Microphone Jack The DC IN LED indicates the computer is connected to the AC adapter and it is plugged into an AC power source.

  • Page 43: Right Side

    Headphone Jack Volume Control Right side The following figure shows the computer’s right side. * The availability of this feature is dependent on the model you purchased. Express Card Slot Optical Disc Drive Optical Disc Drive User’s Manual The headphone jack lets you connect stereo headphones or other audio-output devices such as external speakers.

  • Page 44: Left Side

    Left side The following figure shows the computer’s left side. * The availability of this feature is dependent on the model you purchased. RGB Monitor Port Fan Vents To prevent possible over heating of the CPU, never block the fan vent. TV Out Port i .LINK (IEEE1394) Port...

  • Page 45: Back Side

    Back side The following figure shows the computer back panel. Modem Jack Security Lock LAN Jack Universal Serial Bus (USB) Ports DC IN 19V Jack User’s Manual Modem Jack Security Lock LAN Jack The back side of the computer The internal modem is installed as standard equipment, this jack lets you use a modular cable to connect the modem directly to a telephone line.

  • Page 46: Underside

    Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. Expansion Memory Socket Fan Vent Expansion Memory Socket Fan Vent Battery Pack Latch The bottom of the computer Use this socket to install a memory module to increase your computer’s memory.

  • Page 47: Front With The Display Open

    Front with the display open The following figure shows the front of the computer with the display open. To open the display, push the latch on the front of the display and lift it up. Position the display at a comfortable viewing angle. User’s Manual The front with the display open The Grand Tour...
  • Page 48 TouchPad TouchPad Control Buttons Left and Right Speakers Power Button Internet Button CD/DVD Button When you use Express Media Player, please assign the CD/DVD button to “CD/DVD” in TOSHIBA Controls Properties. The TouchPad pointing device is located in the center of the palm rest and is used to control the on-screen pointer.

  • Page 49: Keyboard Indicators

    Play/Pause Button Stop/Eject Button Next Button Previous Button If Random or Shuffle is selected in Windows or Previous advances to a random selection. Keyboard Indicators Arrow Mode Arrow Mode Numeric Mode User’s Manual Press this button to begin playing an audio CD, a DVD movie or digital audio files.

  • Page 50: Optical Disc Drive

    Caps Lock Optical Disc drive The computer will either have a CD-RW/DVD-ROM drive, or a single layer or dual layer DVD Super Multi drive supporting ±R Double Layer depending on its configuration. An ATAPI interface controller is used for the operation of these optical drives.
  • Page 51 DVDs ■ DVD-R and DVD+R discs can be written only once. The recorded data cannot be erased or changed. ■ DVD-RW, DVD+RW and DVD-RAM discs can be recorded more than once. CD-RW/DVD-ROM drive The full-size CD-RW/DVD-ROM drive module lets you record data to rewritable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") discs without using an adapter.
  • Page 52 The Grand Tour 2-12 User’s Manual...

  • Page 53: Ac Adapter

    Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Setting up your work space - for your health and safety Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability.
  • Page 54 General conditions In general, if you are comfortable, so is your computer, but read the following to make sure your work site provides a proper environment. ■ Make sure there is adequate space around the computer for proper ventilation. ■ Make sure the AC power cord connects to an outlet that is close to the computer and easily accessible.
  • Page 55 Seating and posture The height of your chair in relation to the computer and keyboard as well as the support it gives your body are primary factors in reducing work strain. Below eye level Foot rest ■ Place your chair so that the keyboard is at or slightly below the level of your elbow.
  • Page 56 Work habits A key to avoiding discomfort or injury from repetitive strain is to vary your activities. If possible, schedule a variety of tasks into your work day. If you must spend long periods at the computer, finding ways to break up the routine can reduce stress and improve your efficiency.

  • Page 57: Connecting The Ac Adapter

    Connecting the AC adapter Attach the AC adapter when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power.

  • Page 58: Opening The Display

    Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Push the display latch on the front of the computer. 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel.

  • Page 59: Starting Up For The First Time

    Starting up for the first time When you first turn on the power, the computer’s initial screen is the ® Windows XP Startup Screen Logo. Follow the on-screen directions for each screen. During setup, you can click the Back button to return to the previous screen.
  • Page 60 Benefits of Hibernation The hibernation feature provides the following benefits: ■ Can be configured so that data is automatically saved to the hard disk before the computer shuts down because of a low battery. User’s Manual...
  • Page 61 Data save in hibernation mode When you turn off the power in hibernation mode, the computer takes a moment to save current memory data to the hard disk. During this time, the Built-in Hard Disk Drive indicator will light. After the computer has saved all data to the hard disk, and it has completely shutdown, you can turn off the power to any peripheral devices.
  • Page 62 Benefits of standby The standby feature provides the following benefits: ■ Restores the previous working environment more rapidly than Hibernation Mode. ■ Saves power by shutting down the system when the computer receives no input or hardware access for the duration set by the System Standby feature.

  • Page 63: Restarting The Computer

    Restarting the computer Certain conditions require that you reset the system. For example, if: ■ You change certain computer settings. ■ An error occurs and the computer does not respond to your keyboard commands. There are three ways to reset the computer system: 1.
  • Page 64 Getting Started 3-12 User’s Manual...

  • Page 65: Chapter 4 Operating Basics

    Operating Basics This chapter gives information on basic operations including using the Touch Pad, optical disc drives, the internal modem, LAN and wireless LAN. It also provides tips on caring for your computer and on heat dispersal. Using the Touch Pad To use the Touch Pad, simply move your finger tip across it in the direction you want the on-screen pointer to go.

  • Page 66: Using The Internal Modem

    Do not press on the Touch Pad too hard or press a sharp object such as a ball point pen against it. The Touch Pad could be damaged. The Touch Pad has similar functions to a two-button mouse with a scroll wheel.
  • Page 67 Region selection Telecommunication regulations vary from one country/region to another, so you will need to make sure the internal modem’s settings are correct for the country/region in which it will be used. 1. Open the Modem Region Select application. It is located on the Programs menu at TOSHIBA >...
  • Page 68 Settings You can enable or disable the following settings: AutoRun Mode Region Select Utility starts automatically when you start up the operating system. Open the Dialing Properties dialog box after selecting region. The dialing properties dialog box will be displayed automatically after you select the region.
  • Page 69 Connecting To connect the modem cable (optional), follow the steps below. 1. Plug one end of the modular cable (optional) into the modem jack. 2. Plug the other end of the modular cable (optional) into a telephone jack Disconnecting To disconnect the modem cable (optional), follow the steps below. 1.

  • Page 70: Lan

    The computer is equipped with networking hardware that supports Ethernet LAN (10megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100BASE-TX). This section describes how to connect/disconnect to a LAN. Do not install or remove an optional memory module while the Wake-up on LAN feature is enabled.

  • Page 71: Wireless Lan

    Disconnecting the LAN cable To disconnect the LAN cable, follow the steps below. 1. Pinch the lever on the connector in the computer’s LAN jack and pull out the connector. 2. Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub.

  • Page 72: Using Optical Disc Drives

    Operating Basics Wireless communication Switch You can enable or disable the wireless LAN function with the on/off switch. No transmissions are sent or received when the switch is off. Slide the switch forward to turn it on and backward to turn it off. Wireless communication LED The LED indicates the status of the wireless communication functions.
  • Page 73 Loading optical disc media To load a disc, follow the steps below. 1. Turn on the power. 2. a. Press the eject button to open the drawer slightly. Eject button b. Pressing the eject button will not open the drawer when the computer’s power is off.
  • Page 74 4. Lay the disc, label side up, in the drawer. 5. Press gently at the center of the disc until you feel it click into place. The disc should lie below the top of the spindle, flush with its base. 6.
  • Page 75 Removing optical disc media To remove the disc, follow the steps below. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical disc indicator to go out before you open the drawer. Also, if the disc is spinning when you open it, wait for it to stop before you remove it.
  • Page 76 Buttons The Internet button and the CD/DVD button can be assigned functions and applications in the TOSHIBA Controls Properties. CD/DVD play control buttons In addition to the power button, the following four buttons control functions relating to the playback of optical media and digital audio data: Play/Pause Stop Next...

  • Page 77: Express Media Player

    Express Media Player Some computers in this series are equipped with the Express Media Player. Express Media Player is a quick play feature that enables users to perform DVD and CD playback without loading Windows. Notes for Express Media Player Express Media Player (CD) and Express Media Player (DVD) Usage ■...

  • Page 78: Initial Settings

    ■ To remove a disc from the drive while the player is stopped, simply press the eject button on the drive. If the player is playing the media, press the “E” key, which will stop the player and eject the disc. If you manually remove the disc by using the eject hole on the drive during playback, the DVD-Video playback may not work.
  • Page 79 Language of Keyboard type User’s Manual Display Language Arabian Belgium Brazilian/Portuguese Czech Danish Dutch English Estonian Finnish French French Canadian German Greek Hungarian Hungarian Italian Japanese Korean Lithuanian Norwegian Polish Portuguese Russian Simplified Chinese Slovenian Spanish Swedish Switzerland Turkish Keyboard layout Others French Others...
  • Page 80 Language of Keyboard type Ps: Others means “English” Functions via the Front operation panel and the keyboard in the Express Media Player mode This list shows how the functions available from the keyboard correspond to those available from the Front operation panel. Front panel CD/DVD 4-16...
  • Page 81 User’s Manual Enter Executes the selected option Displays or hides the Settings Menu Increases the Ctrl + volume Decreases the Ctrl + volume Mute the volume Rewinds quickly (1x <--> 2x) Skips forwards quickly (1x <--> 2x) Next track Previous track Space Play or pauses Ctrl + Space...

  • Page 82: Writing Cds On A Cd-Rw/Dvd-Rom Drive

    Writing CDs on a CD-RW/DVD-ROM drive You can use the CD-RW/DVD-ROM drive to write data to CD-R/RW discs. The following applications for writing are preinstalled: Record Now!/DLA, licensed by Sonic Solutions. Important message Before you write or rewrite to CD-R/RW media, read and follow all setup and operating instructions in this section.
  • Page 83 TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used.

  • Page 84: Writing Cds/Dvds On A Dvd Super Multi Drive Supporting ±R Double Layer

    Writing CDs/DVDs on a DVD Super Multi drive supporting ±R Double Layer You can use the DVD Super Multi drive supporting ±R Double Layer to write data to either CD-R/RW or DVD-R/-RW/+R/+RW/-RAM discs. The following applications for writing are preinstalled: Record Now!/DLA, licensed by Sonic Solutions.
  • Page 85 Before writing or rewriting Please observe the following points when you write or rewrite data. ■ Based on TOSHIBA’s limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM media. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc.
  • Page 86 ■ If the disc is poor in quality, dirty or damaged, writing or rewriting errors may occur. Be careful to check the disc for dirt or damage before you use it. ■ The actual number of rewrites to CD-RW or DVD-RW/+RW/-RAM is affected by the quality of the disc and the way it is used.
  • Page 87 ■ Write from the computer’s hard disk drive to the CD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than Sonic RecordNow! or InterVideo WinDVD Creator 2 Platinum has not been confirmed. Therefore, operation with other software cannot be guaranteed.

  • Page 88: Recordnow! Basic For Toshiba

    RecordNow! Basic for TOSHIBA Note the following limitations when you use RecordNow!: ■ DVD-Video cannot be created using RecordNow! ■ DVD-Audio cannot be created using RecordNow! ■ You cannot use the RecordNow! “Audio CD for Car or Home CD Player” function to record music to the DVD-R/-RW or DVD+R/+RW media.

  • Page 89: Dla For Toshiba

    Data Verification To verify that data is written or rewritten correctly, follow the steps below before you write or rewrite a Data disc. 1. Click the Options button ( the Options panels. 2. Select the Data in the left-side menu. 3.

  • Page 90: When Using Windvd Creator 2 Platinum

    When Using WinDVD Creator 2 Platinum You can record video back to your digital camcorder via i.LINK (IEEE1394) using WinDVD Creator Platinum. However, in some instances you may find that the playback sound is ’choppy’ - if this is the case perform the following steps: 1.
  • Page 91 Important information for use Note the following limitations when you write video DVD: 1. Editing digital video ■ Log in with Administrator rights to use WinDVD Creator. ■ Make sure that your computer is running on AC power when using WinDVD Creator.
  • Page 92 2. Before recording the video to DVD ■ When you record to DVD media, please use only discs recommended by the drive manufacturer. ■ Do not set the working drive to be a slow device like a USB 1.1 hard disk drive or it will fail to write the DVD.

  • Page 93: Media Care

    Media Care This section provides tips on protecting data stored on your discs and disks. Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on it: 1. Store your discs in the container they came in to protect them and keep them clean.

  • Page 94: Tv-Out

    TV-Out Use the TV-Out port to connect to a television. Be sure to use a 4 pin type S-video cable. For more details, see Setting up more than one display You can set up your computer to utilize more than one display, effectively spreading a single desktop screen across two monitors.

  • Page 95: Cleaning The Computer

    If an external display will not be connected next time you use your computer, you should cancel any extended desktop or clone display settings before shutting down your computer. Clone display settings are those where more than one device has been selected and is simultaneously applicable.
  • Page 96 Operating Basics 4-32 User’s Manual...

  • Page 97: Chapter 5 The Keyboard

    The Keyboard The computer’s keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with.

  • Page 98: F1 ... F12 Function Keys

    F1 ... F12 function keys The function keys, not to be confused with Fn, are the 12 keys at the top of your keyboard. These keys are dark gray, but function differently from the other dark gray keys. F1 through F12 are called function keys because they execute programmed functions when pressed.

  • Page 99: Hotkeys

    Press Fn + Enter to simulate Enter on the enhanced keyboard’s numeric keypad. Press Fn + Ctrl to simulate the enhanced keyboard’s right Ctrl key. Hotkeys Fn + ESC Fn + F1 Fn + F2 Fn + F3 Fn + F4 Fn + F5 Default resolution for simultaneous mode is set to XGA (1024x768).

  • Page 100: Windows Special Keys

    Fn + F11 Fn + F12 Fn + Space Fn + 1 Fn + 2 Before using Fn+1 and Fn+2, you must install the TOSHIBA Zooming Utility. Please be aware that this ’zooming’ function is only available within Microsoft Internet Explorer, Microsoft Office, Windows Media Player and Adobe Reader, and for the icons on the desktop.

  • Page 101: Keypad Overlay

    Keypad overlay Your computer’s keyboard does not have an independent numeric keypad, but its numeric keypad overlay functions like one. The keys in the center of the keyboard with white letters make up the numeric keypad overlay. The overlay provides the same functions as the numeric keypad.

  • Page 102: Generating Ascii Characters

    Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold down Fn and press any other key. All keys will operate as if the overlay were off. 2.

  • Page 103: Chapter 6 Power And Power-Up Modes

    Power and Power-Up Modes The computer’s power resources include the AC adapter and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes. Power conditions The computer’s operating capability and battery charge status are affected by the power conditions: whether an AC adapter is connected, whether a...

  • Page 104: Power Indicators

    AC adapter Battery capacity not connected is above low battery trigger point Battery capacity is below low battery trigger point Battery capacity exhausted No battery installed Power indicators As shown in the above table, the Battery, DC IN and Power indicators alert you to the computer’s operating capability and battery charge status Battery indicator Check the Battery indicator to determine the status of the battery.
  • Page 105 Power and Power-Up ModesUser ’ s User’s Manual...
  • Page 106 Power and Power-Up Modes User’s Manual...

  • Page 107: Care And Use Of The Battery Pack

    Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack. Follow the instructions in this section carefully to ensure safe operation and maximum performance.
  • Page 108 8. Never expose the battery pack to abnormal shock, vibration or pressure. The battery pack’s internal protective device will fail, causing it to overheat, explode, ignite or leak caustic liquids possibly resulting in death or serious injury. 9. Never let a battery pack become wet. A wet battery pack will overheat, ignite or rupture possibly resulting in death or serious injury.
  • Page 109 6. Be sure to monitor the remaining battery power. If the battery pack or real time clock battery discharge completely, Standby Mode will not function, and data in memory will be lost, and the computer might register an incorrect time and date. In this case, connect the AC adapter to recharge the batteries.
  • Page 110 Power and Power-Up Modes Charging time (hours) User’s Manual...
  • Page 111 Monitoring battery capacity Remaining battery power can be monitored by the TOSHIBA Power Saver. Refer to Utilities ■ Wait for a moment after turning on the computer before trying to monitor the remaining operating time. The computer needs this time to check the battery’s remaining capacity.

  • Page 112: Replacing The Battery Pack

    Retaining data with power off (standby mode) When you turn off your computer with fully charged batteries, the batteries retain data/charge for the following approximate time periods: Battery RTC battery Extending battery life To maximize the life of your battery pack: ■...

  • Page 113: Installing The Battery Pack

    6. Unlock the Battery Pack Lock. 7. Slide the battery pack latch to the left, then pull the battery out of the battery bay. Installing the battery pack To install a battery pack, follow the steps below. The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of.

  • Page 114: Toshiba Supervisor Password Utility

    4. Gently slide the battery into the battery bay until the latch clicks into place. TOSHIBA Supervisor Password Utility The TOSHIBA Supervisor Password Utility provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Supervisor Password Utility are different from the Windows User Password To start the utility, point to or click the following items:...

  • Page 115: Power-Up Modes

    Supervisor password If you set a supervisor password, some functions will be restricted when a user logs on with the user password. To set a supervisor password: TOSHIBA Assist -> SECURE -> Supervisor password This utility lets you do the following: ■...

  • Page 116: Panel Power Off/On

    Panel power off/on This feature makes the computer to enter Hibernation when the display panel is closed and turns it back on when the display panel is opened. If the panel power off function is enabled and you use Shut down Windows, do not close the display until the shut down function is completed.

  • Page 117: Chapter 7 Hw Setup

    HW Setup This chapter explains how to use the TOSHIBA HW Setup utility to configure your computer. TOSHIBA HW Setup lets you configure settings for various hardware devices through a number of tabs titled General, Password, Display, Boot Priority, Keyboard, CPU, LAN, and USB. Some models are not equipped with the CPU tab.
  • Page 119 Boot Priority Boot Priority Options This option sets the priority for booting the computer. You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting: To select the boot drive you want, follow the steps below. 1.
  • Page 120 The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature. Do not install or remove an optional memory module while Wake-up on LAN is enabled. Built-in LAN This feature enables or disables the Built-in LAN. Enabled Disabled Enables Built-in LAN function (Default).

  • Page 121: Chapter 8 Optional Devices

    Optional Devices Optional devices can expand the computer’s capabilities and its versatility. This chapter describes connection or installation of the following types of devices, which are available from your TOSHIBA dealer: Cards/Memory ■ PC card ■ Express Card ■ SD (Secure Digital) / MMC (MultiMediaCard) / MS (Memory Stick) / MS Pro (Memory Stick Pro) / xD (xD-Picture Card) cards ■...

  • Page 122: Pc Card

    PC Card The computer is equipped with a PC Card expansion slot that can accommodate one 5 mm Type II card. Any PC Card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slots support 16-bit PC Cards, including PC Card 16’s multifunction card and CardBus PC Cards.
  • Page 123 Optional Devices Removing a PC card 1. Click the Safely Remove Hardware icon on the Task Bar. 2. Click the PC Card you want to remove. 3. Press the eject button of the PC Card to extend it. 4. Press the extended eject button to pop the card out slightly. 5.

  • Page 124: Expresscard

    Optional Devices ExpressCard The computer is equipped with an ExpressCard expansion slot that can accommodate two standard module formats; an ExpressCard/34 module and an ExpressCard/54 module. An ExpressCard module is a small, modular add-in card technology based on PCI Express and Universal Serial Bus (USB) interfaces.

  • Page 125: Sd/Mmc/Ms/Ms Pro/Xd Memory Cards

    Removing an ExpressCard 1. Click the Safety Remove Hardware icon on the Task Bar. 2. Click the ExpressCard you want to remove. 3. Press the ExpressCard once to extend it. 4. Grasp the extended ExpressCard, and remove it. SD/MMC/MS/MS Pro/xD Memory cards The computer is equipped with a multiple digital media card slot that can accommodate SD/MMC/MS/MS Pro/xD memory cards.
  • Page 126 Installing a memory card To install a memory card: 1. Insert the memory card. 2. Press gently to ensure a firm connection. Be sure the memory card is oriented properly before you insert it. ® If Windows ■ The multiple digital media card slot only accepts one type of card at a time.
  • Page 127 Removing a memory card To remove a memory card, follow the steps below: 1. Click the Safely Remove Hardware icon on the Taskbar. 2. Select a device, then click the Stop button. A confirmation dialog may appear, depending on how the device is registered with the system; if so, confirm that you want to remove the device.

  • Page 128: Memory Expansion

    Memory card care 1. Do not write to a memory card if the battery power is low. Low power could affect writing accuracy. 2. Do not remove a memory card while read/write is in progress. 3. The memory card is designed so that it can be inserted only one way. Do not try to force the card into the slot.
  • Page 129 Installing a memory module If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. Follow these steps to install a memory module: 1.
  • Page 130 7. Push the module down so it lies flat. Latches on either side will click into place to secure the module. 8. Seat the cover and secure it with the screw. 9. Replace the battery pack as described in Chapter 6, Power-Up 10.

  • Page 131: Additional Battery Pack

    Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. 6. Seat the cover and secure its screw. 7. Replace the battery. Additional battery pack You can increase the portability of the computer with additional battery packs.

  • Page 132: External Monitor

    External monitor An external analog monitor can be connected to the external monitor port on the computer. To connect a monitor, follow the steps below. 1. Turn the computer off. 2. Connect the monitor to the external monitor port. 3. Turn the monitor’s power on. 4.
  • Page 133 Optional Devices For the ATI Graphics Controller 1. Click Start > Control Panel > Appearance and Themes. 2. Choose Display to open the Display Properties dialog box 3. Click the Settings tab. User’s Manual 8-13...
  • Page 134 Optional Devices 4. Click the Advanced button and choose Displays 5. Click the TV button to open the TV Properties dialog box. 6. Adjust the TV properties accordingly. 8-14 User’s Manual...
  • Page 135 Optional Devices For the Intel Graphics Controller 1. Click Start > Control Panel > Appearance and Themes. 2. Choose Display to open the Display Properties dialog box. 3. Click Setting tab. User’s Manual 8-15...
  • Page 136 Optional Devices 4. Click the Advanced button and choose Intel ® Graphics Media Accelerator Driver. 5. Click the Graphic Properties button and choose TV. 6. Adjusting the TV settings. 8-16 User’s Manual...

  • Page 137: I.link (Ieee1394)

    i.LINK (IEEE1394) i.LINK (IEEE1394) is used for high-speed data transfer for a range of compatible devices such as: ■ Digital video cameras ■ Hard disk drives ■ MO drives ■ Optical disc drives User’s Manual Optional Devices 8-17...

  • Page 138: Security Lock

    Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer. Attach one end of a cable to the desk and the other end to the security lock slot on the right side of the computer.

  • Page 139: Troubleshooting

    Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring. Problem solving process Resolving problems will be much easier if you observe the following guidelines:...
  • Page 140 Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer.

  • Page 141: Hardware And System Checklist

    Software Hardware Hardware and system checklist This section discusses problems caused by your computer’s hardware or attached peripherals. Basic problems may occur in the following areas: ■ System start-up ■ Self test ■ Power ■ Overheating power down ■ AC Power ■...
  • Page 142 Self test When the computer starts up, the self test will be run automatically, and the following will be displayed: This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system based around how the Boot Priority option is set within the computer’s BIOS setup.
  • Page 143 AC power If you have trouble turning on the computer with the AC adapter connected, check the DC IN indicator. Refer to Chapter 6, Modes, for more information. Problem AC adapter doesn’t power the computer (DC IN indicator does not glow green or blue (depending the model you purchased)).

  • Page 144: Lcd Panel

    Problem Battery doesn’t power the computer as long as expected. Password Problem Cannot enter password Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, Problem Some letter keys produce numbers. Output to screen is garbled.
  • Page 145 Hard disk drive Problem Computer does not boot from hard drive. Slow performance Memory Card Refer also to Chapter 8, Problem Memory card error occurs Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Problem...
  • Page 146 PC Card Refer also to Chapter 8, Problem PC Card error occurs Monitor Refer also to Chapter 8, documentation. Problem Monitor does not turn No display Display error occurs Monitor goes into panning mode Optional Devices. Procedure Reseat the PC Card to make sure it is firmly connected.

  • Page 147: Sound System

    Sound system Problem No sound is heard Pointing device If you are using a USB mouse, also refer to the and to your mouse documentation. Touch Pad Problem On-screen pointer does not respond to Pad operation Double-tapping does not work The mouse pointer moves too fast or too slow...
  • Page 148 USB mouse Problem On-screen pointer does not respond to mouse movement Double-clicking does not work The mouse pointer moves too fast or too slow The mouse pointer moves erratically Refer also to your USB device’s documentation. Problem USB device does not work 9-10 Procedure...
  • Page 149 TV output signal Problem Display on TV is poor No display If you turn the computer off in Standby Mode while the display is on a TV, the computer will select either the internal LCD or an external computer CRT as the display device the next time it is switched on. Problem Cannot access LAN or the Wake up on LAN...

  • Page 150: Memory Expansion

    Memory expansion Refer also to Chapter 8, memory modules. Problem The computer hangs up and issues beep sounds. (A long leep, three short beeps, three short beeps, and then a long beep.) Modem Problem Communication software can’t initialize the modem You can hear a dial tone but can’t make a call You place a call, but a...
  • Page 151 Problem Character display becomes garbled during a communication You cannot receive an incoming call i.LINK (IEEE1394) Problem i.LINK device does not function DVD Super Multi drive supporting ±R Double Layer For more information, refer to Chapter 4, Problem You cannot access a disc in the drive User’s Manual Procedure...
  • Page 152 Problem Some discs run correctly, but others do Cannot write correctly 9-14 Procedure The software or hardware configuration may be causing a problem. Make sure the hardware configuration matches your software’s needs. Check the disc’s documentation. Check the type of disc you are using. The drive supports: DVD-ROM: DVD-ROM, DVD-Video, DVD-R,...
  • Page 153 CD-RW/DVD-ROM drive For more information, refer to Chapter 4, Problem You cannot access a disc in the drive Some discs run correctly, but others do User’s Manual Operating Procedure Make sure the drive’s drawer is securely closed. Press gently until it clicks into place. Open the drawer and make sure the disc is properly seated.
  • Page 154 Problem Cannot write correctly Disk drive For information on disk care refer to Chapter 4, Problem Some programs run correctly, but others do You cannot access the disk drive Real Time Clock Problem The following message is displayed on the LCD: RTC battery is low or CMOS checksum is inconsistent.

  • Page 155: Toshiba Support

    TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.
  • Page 156 Troubleshooting 9-18 User’s Manual...

  • Page 157: Specifications

    Specifications This appendix summarizes the computer’s technical specifications. Dimensions 359mm (W) x 262mm (D) x 38.5mm (H, Max) Weight Starting at 2.71 kg / 5.99 lbs* * Weight may vary depending on product configuration, vendor components, manufacturing variability and options selected. Environmental Requirements Conditions Operating...
  • Page 158 Built-in Modem Network control unit (NCU) Type of NCU Type of line Type of dialing Control command Monitor function Communication specifications Communication System Communication Protocol Communication Speed Error correcting Data compression Telephone line (analog only) Pulse Tone AT commands EIA-578 commands Computer’s speaker Data: Full duplex...
  • Page 159 Display Modes This appendix contains a table listing all the display modes when the display is set to an external monitor. CRT Display Resolution 800 x 600 1024 x 768 1280 x 800 1280 x 1024 1600 x 1200 1920 x 1440 2048 x 1536 User’s Manual Appendix B...

  • Page 160: Appendix B Display Modes

    Displaying movies on a TV or CRT This section describes how to set up your system to display movies simultaneously on your computer’s LCD and on an external TV or CRT monitor. Follow the steps below. For the ATI Graphics Controller 1.
  • Page 161 Display Modes 6. In the properties box, if any additional options are available for your particular device, set them to your liking. 7. Finally, click the ATI Overlay tab to adjust the video overlay properties. User’s Manual...
  • Page 162 Display Modes For the Intel Graphics Controller 1. Click Start > Control Panel > Appearance and Themes. 2. Choose Display to open the Display Properties dialog box. 3. Click Setting tab. User’s Manual...
  • Page 163 Display Modes 4. Click the Advanced button and choose Intel ® Graphics Media Accelerator Driver. 5. Click the Graphic Properties button and choose TV. 6. Adjusting the TV settings. User’s Manual...
  • Page 164 Display Modes User’s Manual...
  • Page 165 AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Wire size:...
  • Page 166 AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three pin plug coniguration must be 6-15P (250V) or 5-15P (125V) as designated in the U.
  • Page 167 If your computer is stolen Always take care of your computer and try to prevent it from being stolen. You are the owner of a valuable technical device, which may be highly attractive to thieves, so please do not leave it unattended in a public place. To further help protect against theft, security cables can be bought for use with your notebook when it is being used at home or in the office.
  • Page 168 TOSHIBA Theft Registration Send to: Fax number: Country stolen: Machine type: (e.g. L20) Model number: (e.g. PSA50 YXT) Serial number: (e.g. 12345678G) Date stolen: Owner’s details Last name, first name: Company: Street: Postal Code/City: Country: Phone: Fax: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr.
  • Page 169 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ASCII: American Standard Code for Information Interchange BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW: Compact Disc-Read/Write CMOS: complementary metal-oxide semiconductor CPU: central processing unit...
  • Page 170 RTC: real time clock SCSI: small computer system interface TFT: thin-film transistor USB: Universal Serial Bus VESA: Video Electronic Standards Association VGA: video graphics array WXGA: wide extended graphics array adaptor: A device that provides an interface between two dissimilar electronic devices.
  • Page 171 cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time.
  • Page 172 CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a fluorescent screen-producing luminous spots. An example is the television set. cursor: A small, blinking rectangle or line that indicates the current position on the display screen. DC: Direct Current. Electric current that flows in one direction. This type of power is usually supplied by batteries.
  • Page 173 floppy disk drive (FDD): An electromechanical device that reads and writes to floppy disks. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
  • Page 174 IrDA 1.1: An industry standard that enables cableless infrared serial data transfer at speeds of up to 4 Mbps. jumper: A small clip or wire that allows you to change the hardware characteristics by electrically connecting two points of a circuit. K: Taken from the Greek word kilo, meaning 1000;...
  • Page 175 numeric keypad overlay: A feature that allows you to use certain keys on the keyboard to perform numeric entry, or to control cursor and page movement. operating system: A group of programs that controls the basic operation of a computer. Operating system functions include interpreting programs, creating data files, and controlling the transmission and receipt (input/output) of data to and from memory and peripheral devices.
  • Page 176 SCSI: Small Computer System Interface is an industry standard interface for connection of a variety of peripheral devices. soft key: Key combinations that emulate keys on the IBM keyboard, change some configuration options, stop program execution, and access the numeric keypad overlay. stop bit: One or more bits of a byte that follow the transmitted character or group codes in asynchronous serial communications.

This manual is also suitable for:

Satellite m70-308Satellite m70-340Satellite m70-376Satellite m70-122Satellite m70-378Satellite m70-160 ... Show all

Table of Contents