4 Replacement Procedures
Removing the Battery Pack
Remove the battery pack according to the following procedures and Figures 4-1.
CAUTION: When handling the battery packs, use care not to short circuit the terminals.
Do not drop, hit, twist, or bend the battery packs. Do not scratch or break up their casing.
1. Turn the computer upside down so that its front can face you.
2. Slide the battery release latch and remove the battery pack from the computer.
NOTE: Dispose of the used battery packs as required by local ordinances or regulations.
4-8
Downloaded from
www.Manualslib.com
Figure 4-1 Removing the battery pack
manuals search engine
4.1 General
TECRA S1 Maintenance Manual