Table of Contents
Advertisement
Memory module slot
HDD pack cover
screws
Hard disk drive
Battery release latch
Battery lock
Battery pack
Ultra Slim Bay
Ultra Slim Bay latch
Be sure to lock the Ultra Slim Bay latch before you transport or carry the
computer.
Ultra Slim Bay lock
screw (lock position)
User's Manual
The slot B memory module is located here. The
memory module slot allows for the installation,
replacement and removal of additional memory
module.
Refer to the
Additional memory module
Chapter 3, Hardware, Utilities and Options.
The HDD pack cover screws are the screws that
hold the hard disk drive cover in place.
This contains a Hard disk drive pack, which can
be removed and reinstalled. For more
information on how to remove or reinstall, please
refer to the
HDD Kit (Serial-ATA)
Chapter 3, Hardware, Utilities and Options.
Slide and hold this latch into its 'Unlock' position
in order to release the battery pack ready for
removal. For more detailed information on
removing the battery pack please refer to
Chapter 6,
Power and Power-Up
Slide the battery lock to release the battery pack
for removal.
The battery pack provides power to the computer
when the AC adaptor is not connected. For more
detailed information on the use and operation of
the battery pack please refer to Chapter 6,
and Power-Up
Modes.
Refer to the
Right side
details.
Slide the latch to release or secure the Ultra Slim
Bay latch.
Lock position is used to lock the Ultra Slim Bay
Latch.
The Ultra Slim Bay Latch is locked by securing
the Ultra Slim Bay Lock screw into the lock
position.
The Grand Tour
section in
section in
Modes.
section in this chapter for
Power
2-8
Advertisement
Table of Contents
