Table of Contents
Advertisement
Auto Power On
This is a function for automatically turning on the computer. This item
shows the current Auto Power On setting. When Alarm Time, Wake-up on
LAN, or Critical Battery Wake-up are Enabled, Auto Power On is also
Enabled.
Alarm Time, Wake-up on LAN, on Battery and Critical Battery Wake-up can
be configured under OPTIONS.
Enabled
Disabled
on Battery
The setting is available when the Wake-up on LAN is Enabled.
Enabled
Disabled
Critical Battery Wake-up
Configures what action is taken when the remaining battery power is close
to running out while the system is in Sleep Mode.
This setting is only available when the Critical battery action in Windows is
set to Hibernate (Default).
To access it, Start -> Control Panel -> System and Maintenance ->
Power Options -> Edit Plan Settings -> Change advanced power
settings -> Battery.
The operation of this function is dependent upon battery status.
Enabled
Disabled
User's Manual
Either Alarm Time, Wake-up on LAN, or Critical
Battery Wake-up is set to Enabled (Default).
Alarm Time, Wake-up on LAN, and Critical
Battery Wake-up are Disabled.
Enables Wake-up on LAN function when
operating from the battery.
Disables Wake-up on LAN function when
operating from the battery (Default).
When the remaining battery power is about to run
out while the system is in Sleep Mode, the
system is automatically woken up and then
switched to Hibernation Mode (Default).
No action is taken even if the remaining battery
power is about to run out while the system is in
Sleep Mode.
HW Setup & BIOS Setup
7-11
Advertisement
Table of Contents
