Table of Contents
Advertisement
Audio Enhancements
In order to apply the sound effects for your current speaker, follow the steps
below.
1. Right click on the speaker icon on the Taskbar, and select Playback
Devices from the sub menu.
2. Select Speakers, and click Properties.
3. On the Enhancements tab select the sound effects you would like, and
click Apply.
Realtek HD Audio Manager
You can confirm and change the audio configuration using the Realtek
Audio Manager. To launch the Realtek Audio Manager, click Start ->
Control Panel -> Hardware and Sound -> Realtek HD Audio Manager.
When you first launch the Realtek Audio Manager, you will see two device
tabs. Speakers is the default output device. Microphone is the default
input device. To change the default device, click the Set Default Device
button under the chosen device tab.
Information
Click the information button
information, and language setting.
Power Management
The audio controller in your computer can be turned off when the audio
function is not used. To adjust the configuration of audio power
management, click the battery button
■
When audio power management is enabled, the circle button at the
upper left of the Power Management is blue and convex.
■
When audio power management is disabled, the button is black and
concave.
Speaker Configuration
Click the playback button
headphone sound is coming from the right direction.
Default Format
You can change the sample rate and bit depth of sound.
User's Manual
to view hardware information, software
.
to confirm the internal speakers or the
Operating Basics
4-42
Advertisement
Table of Contents
