Extending Battery Life; Replacing The Battery Pack; Removing The Battery Pack - Toshiba Satellite Pro R50-B series User Manual

Hide thumbs Also See for Satellite Pro R50-B series:
Table of Contents

Advertisement

Extending battery life

To maximize the life of your battery packs, do the following at least once a
month.
1.
2.
3.
4.
5.

Replacing the battery pack

Be aware that the battery pack is classified as a consumable item.
The operating life of the battery pack will gradually reduce through
repeated charging and discharging, and should be replaced when it
reaches the end of its operating life. In addition to this, you might also
replace a discharged battery pack with a charged spare when you are
operating your computer away from an AC power source for an extended
period of time.
This section explains how to remove and install the battery pack, and
begins with the removal process which is detailed through the following
steps.

Removing the battery pack

To remove a discharged battery, do the following:
1.
User's Manual
Turn off the computer's power.
Disconnect the AC adaptor and turn on the computer's power. If it
does not turn on then go to Step 4.
Operate the computer on battery power for five minutes. If you find
that the battery pack has at least five minutes of operating time,
continue operating until the battery pack is fully discharged. However,
if the DC IN/Battery indicator flashes or there is some other warning
to indicate a low battery condition, go to Step 4.
Connect the AC adaptor to the DC IN 19V jack of the computer, and to
a wall outlet that is supplying power. The DC IN/Battery indicator
glows orange to indicate that the battery pack is being charged.
However, if DC IN/Battery indicator does not glow, this indicates that
power is not being supplied. Check the connections for the AC adaptor
and the power cord.
Charge the battery pack until the DC IN/Battery indicator glows white.
Do not remove the battery pack while the computer is in Sleep Mode,
as data is stored in RAM, so if the computer loses power it could be
lost.
In Hibernation Mode, data will be lost if you remove the battery pack or
disconnect the AC adaptor before the save is completed.
Do not touch the battery release latch while holding the computer or
the battery pack might fall out due to the unintentional release of the
battery release latch and cause injuries.
Save your work.
4-18

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tecra c50-b series

Table of Contents