Tightrope Media Systems Cablecast Setup Manual page 14

3.3.2 Create Record Devices
3 Part II: Software Setup
To create the first record device:
1. Once again, click the "New" button on the device list screen to create a new
device.
2. Click in the newly created device (labeled New Input) to enter the Edit
Device screen.
3. Enter the following information in the device fields:
Device Function : "Record Only"
Device CMS : Select the "Video Encoder" Control Mod-
ule Set that you created in section
Device Address : "0". Device addresses are zero-based, so
the first record device's address is zero, the second is one, and so on.
Device End Action : Select "Stop Record"
Router Output : Enter the output number of your routing
switcher that is connected to this record input.
When finished, your screen should like like figure
to return to the device list screen.
Name : "Record 1"
Device Type : "Digital File"
3.2 on page 9.
on the next page. Click Save
3.7
13