Tightrope Media Systems Cablecast Setup Manual page 13

F 3.6: Setting up the
IGURE
second playback device.
3 Part II: Software Setup
1. Click the New button to create the second playback device.
2. Click in the newly created device (labeled New Input) to enter the Edit
Device screen.
3. Enter the following information in the device fields:
back channel you're adding
Router Input : Enter the input number of your routing
switcher
Device Function : "Playback Only"
Device CMS : Select the "Video Playback" Control Mod-
ule Set that you created in section
Device Address : "1". Device addresses are zero-based, so
the second playback device's address is one, the third is two, and so on.
Device End Action : Select "None"
When finished, your screen should like like figure 3.6. Click Save to return to the
device list screen.
Next, we'll configure the record device(s).
Name : "Playback 2" or the number of the play-
Device Type : "Digital File"
3.2 on page 9.
12