General Headset
Instructions
1 Insert the cord for the headset amplifier into the handset cord receptacle
2 Insert the cord for the telephone handset into the headset amplifier.
3 Put on the headset.
4 Pick up the telephone handset and set it on your desk.
1 Insert the cord for the headset amplifier into the handset cord receptacle
2 Insert both the headset cord and the handset cord into the headset
3 For headset calls: Lift the handset off the telephone and leave it off. Use
4 For handset calls: Press the button on the headset amplifier that turns
1 Put the headset on. When a call comes in:
2 To end a call when you are using a headset:
For all telephones other than the NBX 3102 Business Telephone, follow
these instructions.
You may need to modify some of these instructions for some headsets or
amplifiers. See the instructions that come with your equipment.
To prepare a headset for all calls:
on the underside of the telephone.
To prepare a headset so that you can choose either the handset or the
headset for each call:
on the underside of the telephone.
amplifier.
the headset microphone and earphones.
Even when the headset is plugged into the amplifier, you must remove
the handset from the cradle to use the headset.
the headset off, pick up the handset, and speak into it.
To manage calls when you are using the headset:
If the handset is on hook, pick it up, set it on your desk, and begin to
■
speak.
If the handset is off hook, press the System Appearance button beside
■
the flashing light.
On an NBX Business Telephone, press the Release button, depress the
■
hook switch, or hang up the handset.
On an NBX Basic Telephone or an analog telephone, hang up the
■
handset or press the Feature button and 111.
Using a Headset
83